Common sense and category of drying equipment

Zyzhan analyzes the common sense and category of drying equipment

China's drying equipment will occupy 90% of the domestic market. At present, there are two methods for the regional focus of performance problems and technological innovation capability. Most manufacturing enterprises in China's drying equipment industry have gradually produced early-stage enterprises on the basis of this industry, with relatively centralized geographical location and serious defects in personnel structure

so far, enterprises are mainly distributed in Jiangsu, Zhejiang, Shanghai, Liaoning and black. These enterprises account for almost 50% of the total number of the whole industry. In sharp contrast, there are no drying equipment manufacturers in some regions in China. In highly competitive industries, some companies focus on the immediate results, do not need any systematic development, improve the overall quality, and progress is slow, which seriously hinders the normal development of the industry. Technological development is not strong. Since the reform and opening up, especially in recent years, China's economic growth potential has been effectively released, and the supply and demand of the shortage economy have undergone fundamental changes, initially forming a buyer's market. Under the pressure of the buyer's market, some enterprises catch up in the market rather than looking for and exploring new markets. Enterprises focus on the needs of the market in the near future and more mature products

therefore, manufacturers are more concentrated and competitive in ovens, vibrating fluidized bed dryers and other products. The drying equipment industry is engaged in the development of small enterprises, new products, and the perfect introduction of new products, mainly imitating each other. It is recommended to turn on to ensure that static electricity will not cause damage to the instrument; Develop advanced technology and improve product quality. Compared with developed countries in the world, there is still a certain gap in China's drying equipment technology in the same industry. In the current market, Jinan experimental machine (steel strand experimental machine) with low technical content mainly adopts microcomputer controlled electro-hydraulic servo valve loading and manual hydraulic loading, and the main body is separated from the control frame

now there are more international peers entering the domestic market. With the increasingly serious international competition, we will face great competitive pressure. The world's leading manufacturer of drying equipment. With the acceleration of economic globalization, more companies will target the Chinese market. The increasingly fierce competition requires us to absorb foreign advanced technology, innovate and improve product quality through the progress of enterprises

the characteristics of adjusting enterprises and cultivating the core competitiveness of enterprises in China are that the manufacturers of dry testing machines plan the oil way direction of valve blocks, which plays a very important role in the transformation of pressure. Enterprises in the dry industry do not do this, which is not strong and suitable, rather than perfect, but the overall quality is not high. Most enterprises are backward in management and do not conform to the corresponding economies of scale. Through the guidance and coordination of industry associations, we can change the situation of blind development

at present, the drying equipment industry has entered a relatively mature stage of development, which can better meet the actual needs of users in various fields. The price of foreign similar products is only 1/3, which makes the price of drying equipment in China have an obvious advantage over that of imported equipment in the market competition; On the other hand, most of the larger drying equipment also involves on-site installation, commissioning and after-sales service, which makes it more convenient for domestic users and imported equipment of domestic equipment to choose more options. In the international market, China's accession to the WTO will be more conducive to expanding exports of drying equipment

China's main export products are vacuum drying equipment, drying equipment, vibration, small and medium-sized grain, agriculture, forestry, food and local product drying equipment, with an annual export volume of more than 100 vehicles, mainly exported to Southeast Asian countries and other developing countries, and opened the door to European and American markets. At present, China's exports account for less than 5% of the total amount of drying equipment. Experts predict that the total share of drying equipment for export products in China during the Tenth Five Year Plan period will exceed 10%. International competition, the main competitors of drying equipment manufacturing enterprises in China are Denmark, Switzerland, Britain, Germany, the United States and Japan

compared with competitors, the advantage is that the drying equipment in China is very cheap, which is mainly due to the shortage. The products that control the degree of automation, appearance quality, function set and combination have been further improved. Strengthen technical exchanges, learn from and learn from foreign advanced drying equipment and drying equipment with foreign countries, so as to accelerate the improvement of China's automation degree and control, appearance quality, function set and combination, and narrow the products with foreign countries to improve the trust of our products in users. Therefore, drying equipment in China can be carried out not only in the domestic market, but also in foreign markets

China is producing more and more varieties of drying equipment, expanding the scale, level and quality of products, increasing the market competitiveness. In particular, the relevant policies of the Chinese government to support exports and the production of drying equipment have created good external conditions for domestic enterprises, which shows that China's fayingchuangkai has issued a new kind of special molding composite material: Plexiglas high gloss NTA (5) drying equipment with good prospects